HSS-E Kurzer Maschinengewindebohrer, Form C, NPS-Gasgewinde
Ref : 994
Für den allgemeinen Gebrauch
- leicht zerspanbare Materialien mit 900 N/mm²
- unlegierte oder niedriglegierte Stähle
- zum Hand- und Maschinengewindeschneiden
- für Durchgangslöcher und Sacklöcher
- leicht zerspanbare Materialien mit 900 N/mm²
- unlegierte oder niedriglegierte Stähle
- zum Hand- und Maschinengewindeschneiden
- für Durchgangslöcher und Sacklöcher
Gegenstand | Typ |
---|---|
STÄHLE |
bis 800 N/mm2
|
Melden Sie sich an, um auf Ihr Konto zuzugreifen
Bezeichnung | Ø Werkzeuge | Ø Schwanz von d2 | Nützliche Länge |
Gesamtlänge | Aktie | Preis | |
---|---|---|---|---|---|---|---|
99402 NPS 1/16 Tar. Mach. Form C HSS-E | NPS 1/16 x 27 | 8.0 | 17.5 | 54 | 6.0 | / | 19,20 € |
99406 NPS 1/8 Tar. Mach. Form C HSS-E | NPS 1/8 x 27 | 8.0 | 19.0 | 55 | 6.0 | / | 17,50 € |
99414 NPS 1/4 Tar. Mach. Form C HSS-E | NPS 1/4 x 18 | 11.0 | 28.0 | 62 | 9.0 | / | 21,30 € |
99418 NPS 3/8 Tar. Mach. Form C HSS-E | NPS 3/8 x 18 | 14.0 | 28.0 | 65 | 11.0 | / | 26,00 € |
99422 NPS 1/2 Tar. Mach. Form C HSS-E | NPS 1/2 x 14 | 18.0 | 35.0 | 80 | 14.0 | / | 31,00 € |
99430 NPS 3/4 Tar. Mach. Form C HSS-E | NPS 3/4 x 14 | 23.0 | 35.0 | 85 | 17.0 | / | 38,40 € |
"99438 NPS 1"" Tar. Mach. Form C HSS-E | NPS 1'' x 11.5 | 26.0 | 45.0 | 95 | 21.0 | / | 61,20 € |
99446 NPS 1.1/4 Tar. Mach. Form C HSS-E | NPS 1.1/4 x 11.5 | 32.0 | 45.0 | 105 | 26.0 | / | 92,40 € |
99454 NPS 1.1/2 Tar. Mach. Form C HSS-E | NPS 1.1/2 x 11.5 | 38.0 | 45.0 | 110 | 29.0 | / | 330,00 € |
"99470 NPS 2""Tar. Mach. Form C HSS-E | NPS 2'' x 11.5 | 46.0 | 50.0 | 120 | 35.0 | / | 370,00 € |
LIEFERUNGSVERSPÄTUNG
Bei Produkten, die nicht vorrätig sind, kontaktieren Sie uns bitte bezüglich der Lieferzeiten.
Produkte, die Sie interessieren könnten
Maschinengewindebohrer DIN5156 Form C ? HSS-E-Rc (BSPT) oder NPT
Ref : 734
WISSEN
83518
Ref : 83518
WISSEN
Lagermaschine DIN376 Form C, 35° HSS-E ? Tol.ISO2/6H & Twinbox-Herd/Gabel
Ref : 387
WISSEN
Rundmatrize DIN223 (DIN en 22568) - HSS - BSF
Ref : 228
WISSEN
Maschinengewindebohrer DIN371 Form C, 15° RSP HSS-E ? Tol.ISO2/6H und M3 auf...
Ref : 376
WISSEN
Rundmatrize DIN223 (DIN en 22568) - HSS - UNEF
Ref : 246
WISSEN
Doppelter Gewindebohrer, Multi-Drive - HSS-G -Tol.ISO2/6H MF oder G (BSP) /...
Ref : 678
WISSEN
Taraud-Maschine DIN371 Form B HSS-E- Tol.2B - UNF
Ref : 765
WISSEN
Maschinengewindebohrer DIN371 Form B-AZ HSS-E Tol.ISO2/6H und M3 auf M12...
Ref : 379
WISSEN
Taraud-Maschine DIN376 Form B HSS-E Tol.ISO2/6H & Twinbox Taraud/Fort
Ref : 385
WISSEN
Maschinengewindebohrer mit grünem Ring DIN371/376 Form B -HSS-E -...
Ref : 353
WISSEN
Sechskantmatrize DIN382 - HSS - BSF
Ref : 225
WISSEN