CUTTING TOOLS
Short Machine Tap HSS-G -Form B- GUN - Rc (BSPT)
Ref : 975
For general use
- non abrasive material up to 900 N/mm²
- unalloyed and low alloyed steel
- for thread cutting by hand and machine
- for through holes
- non abrasive material up to 900 N/mm²
- unalloyed and low alloyed steel
- for thread cutting by hand and machine
- for through holes
| Cone-shaped gaz thread | |
| Right hand thread |
| Matter | Type |
|---|---|
| STEELS |
up to 800N/mm2
|
LOG IN TO ACCESS YOUR ACCOUNT
| Designation | Ø tools | Ø tail d2 | Useful length |
Total length |
Stock | Price | |
|---|---|---|---|---|---|---|---|
| 97502 PT 1/16 Machine Tap form B GUN | PT 1/16 x 28 | 8 | 17.5 | 55 | 6.0 | / | 8,80 € |
| 97506 PT 1/8 Machine Tap form B GUN | PT 1/8 x 28 | 8 | 19.0 | 55 | 6.0 | / | 9,30 € |
| 97514 PT 1/4 Machine Tap form B GUN | PT 1/4 x 19 | 11 | 28.0 | 62 | 9.0 | / | 11,40 € |
| 97518 PT 3/8 Machine Tap form B GUN | PT 3/8 x 19 | 14 | 28.0 | 65 | 11.0 | / | 18,30 € |
| 97522 PT 1/2 Machine Tap form B GUN | PT 1/2 x 14 | 18 | 35.0 | 80 | 14.0 | / | 28,00 € |
| 97530 PT 3/4 Machine Tap form B GUN | PT 3/4 x 14 | 23 | 35.0 | 85 | 17.0 | / | 42,00 € |
| "97538 PT 1"" Machine Tap form B GUN" | PT 1'' x 11 | 26 | 45.0 | 95 | 21.0 | / | 65,00 € |
| 97546 PT 1.1/4 Machine Tap form B GUN | PT 1.1/4 x 11 | 32 | 45.0 | 105 | 26.0 | / | 97,00 € |
| 97554 PT 1.1/2 Machine Tap form B GUN | PT 1.1/2 x 11 | 38 | 45.0 | 110 | 29.0 | / | 260,00 € |
| "97570 PT 2"" Machine Tap form B GUN" | PT 2'' x 11 | 46 | 50.0 | 120 | 35.0 | / | 534,00 € |
DELIVERY DELAY
For the products out of stock, please contact us
Other products
Round Dies Form A - HSS - NPTF - Taper : 1:16
Ref : 980
MORE
Machine Tap DIN371 Form B-AZ HSS-E Tol.ISO2/6H and set M3 à M12
Ref : 379
MORE
Rouge Ring machine Tap DIN371 Form A - HSS-E- Tol.ISO2/6H
Ref : 361
MORE
Machine Tap DIN376 Form B HSS-E - Tol.2B - UNC
Ref : 755
MORE
Short Machine Tap HSS-G -Form C- 35° - Rc (BSPT)
Ref : 977
MORE
Machine Tap DIN376 Form B HSS-E - BSW
Ref : 715
MORE
Machine Tap, oversize DIN371/376- 6G or 7G or + 0.1 - Form C/35° RSP - HSS-E
Ref : 327
MORE
Machine Tap ISO529 HSS-E Form B ou C/35° RSP, Tol.2B - 12-UN or UNEF
Ref : 833
MORE
Machine Tap DIN376 Form C 35° RSP - HSS-E - Tol.2B - UNF
Ref : 777
MORE
Die Stocks - Inch - with 3 screws
Ref : 155
MORE
Machine tap semi-long - Steam tempered recommended for Inox
Ref : P745
MORE
Short Machine Tap DIN352 form B GUN,HSS-E, Tol.ISO2/6H
Ref : 615
MORE